Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

monitor nvram corrupt

folks,

i've 2 queries so thanks in advance to anyone taking the time to answer:

1. I've had 2 * 3600 routers crash i 2 days & both

are rebooting into rommon - when i force a reload

they work for a while and then drop off the

network again - any ideas whats causing this or

what i can do?

2. I have another router with a no. of BRI interface

and Ethernet interfaces (also a 3600) & its

falling off the network, works ok for a short

time. When connected by hyperterminal i can see a

monitor nvram corrupt message - again, any ideas

on reboot but then drops again any ideas what i

can do here?

many thanks to all replying!

1 REPLY
Silver

Re: monitor nvram corrupt

Type "sync" in rommon and try if this works.

98
Views
0
Helpful
1
Replies