a- yes, but not with anything readable within the switches. You will need to use an OTC software to gather data. I'm sure there is some freeware available out there or you could use a vendors product, or a sniffer.
Sure can. But it is done via a FREE application called MRTG run on a separate PC. MRTG can show a multitude of information about each port, VLAN information, switch engine health statistics, etc. If you understand about CIsco MIBs, you can get MRTG to tell you everything that is available within your switch.
MRTG is available for both Wintel and Unix/Linux/?ix clients. Do a GOOGLE search on MRTG and you should be up and running in a very short time.
Hope this helps, but ask questions if you get stuck,
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.