PIX as such cannot do much of URL filtering( or monitor Internet sites visited). You need to have another software to work with it to filter or monitor the URLs. This software is called Websense. Websense should be running on a separate server. So whenever access to some internet site is requested, the request is directed tothe Websense. The Websense decides if access needs to be given. The configuration of the Websense is given in more detail in the following documents:
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...