09-17-2006 03:46 AM - edited 03-03-2019 05:04 AM
Hi,
My company network is bulid by all cisco router and switch. since there are many routers and switch.
What tools can management it most efficient?
Thanks!
Samuel
09-17-2006 05:50 AM
Hi Sam,
There are many tools available and to name few are cisco works, hp open view, smarts etc etc.
Regards,
Ankur
09-17-2006 06:42 AM
Hi Ankur,
If i want to monitor traffic, bandwidth. which one is the best tool? do you have relative link?
Thanks!
Samuel
09-17-2006 06:51 AM
Hi Sam,
For that purpose you can go for solarwinds tools
Also check these links
http://www.monitortools.com/traffic/
http://www.flukenetworks.com/fnet/en-us/
HTH
Ankur
* pls rate helpfull post.
09-18-2006 01:54 AM
Hey there,
If you're on a budget of ?0, then have a look at some of the open source tools. Check out:-
MRTG
Pictures
NTOP
Pictures
NAGIOS
Pictures
MRTG and NTOP and very quick to set up and are fantastic bits of software. NAGIOS is a bit more involved to set up, but is well worth the effort.
Hope that helps,
LH
Please rate all posts
09-18-2006 08:06 AM
09-18-2006 03:05 AM
Hi,
Have a look at the following link too!
-Its free!!!
-Its small in size!!!
-Easy to install!!!
-Easy to configure!!!
And its pretty good too!!!
http://www.mikrotik.com/thedude.php
Hope this helps!!!
Regards,
AbhisheK
Please rate all posts!!!
09-18-2006 07:34 AM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: