Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Movement of the Management VLAN

Hi All,

I need to move a Management VLAN, Looking for a little advice..concerning pit falls and maybe a smooth way to do this operation. My core switch is 6513 , Distro layer is 3508's and most all of access layer devices are 3524-XL or similiar type. Running VTP ver2 and Dot1Q trunking.

Thanks,

Rich

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Movement of the Management VLAN

Rich,

I would clear vlan 1 off all trunks and break up the management vlan into different vlans (1-3). So, you do not have one instance of spanning tree across the whole network. Dot1q (good choice) Vtp--I would go to transparent.

Everything is in the Best Practices doc

www.cisco.com/warp/public/473/103.html

2 REPLIES
Cisco Employee

Re: Movement of the Management VLAN

Rich,

I would clear vlan 1 off all trunks and break up the management vlan into different vlans (1-3). So, you do not have one instance of spanning tree across the whole network. Dot1q (good choice) Vtp--I would go to transparent.

Everything is in the Best Practices doc

www.cisco.com/warp/public/473/103.html

Community Member

Re: Movement of the Management VLAN

Thanks

153
Views
0
Helpful
2
Replies
CreatePlease to create content