06-17-2003 04:35 AM - edited 03-02-2019 08:11 AM
Hello,
I've got a 4-BRIs module on a 3640 with several dialer profile for some customers. I created a Dialer profile for a dialin access for myself with my ISDN modem on my PC.
Now I'd like to configure a MS callback between the router and the PC. But when I want to dialin, there is no callback, it's like a normal dialin connection. This is the ISDN part of my config. I think I should add somewhere map class dialer with the dialer callback-server command, but I don't want to do the callback for specific numbers, that's why I don't have any dialer string or dialer map on the dialer interface configuration:
!
username test callback-dialstring "" password <password>
!
isdn switch-type basic-net3
!
interface BRI2/0
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
no cdp enable
ppp authentication chap
ppp multilink
!
interface BRI2/1
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
no cdp enable
ppp authentication chap
ppp multilink
!
interface BRI2/2
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
no cdp enable
ppp authentication chap
ppp multilink
!
interface BRI2/3
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
no cdp enable
ppp authentication chap
ppp multilink
!
interface Dialer10
description Dialin
ip address 192.168.200.1 255.255.255.248
encapsulation ppp
no ip split-horizon
dialer pool 1
dialer remote-name test
dialer-group 2
no cdp enable
ppp callback accept
ppp authentication chap
!
dialer-list 2 protocol ip permit
!
Thanks for your help
jp
06-17-2003 05:06 AM
As you mentioned you will have to use either a static dialer map to tie a user with a callback string or use Cisco ACS as you can then allow Microsoft client to pass dial back number.
06-17-2003 08:21 AM
Hi,
If this is your complete running configuration then i doubt coz i can't see the strings generated while u connect from the modem " an auotmated string will be generated when u connect and will intialize the callback facility
Thanks
Azhar
06-17-2003 10:21 PM
Thanks for your answers,
I'll try the callback with a specific number and add a dialer string in the dialer profile.
jp
06-18-2003 06:14 AM
Hello,
I tried a basic callback config in lab with my PC and a 2500 router with IOS 12.0. I've got a problem, the PC makes the MS CALLBACK request but the router reject it (CONFREJ). I'm still not sure of my config. Can somebody tell me what's wrong with it, thanks in advance, JP
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname router
!
enable password cisco
!
username test callback-dialstring 839 password 0 test
ip subnet-zero
no ip finger
isdn switch-type basic-net3
!
!
interface Ethernet0
ip address 10.71.0.15 255.255.0.0
no ip directed-broadcast
!
!
interface BRI0
no ip address
no ip directed-broadcast
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
ppp authentication chap
ppp multilink
!
interface Dialer1
ip address 192.168.2.2 255.255.255.248
no ip directed-broadcast
encapsulation ppp
dialer remote-name test
dialer enable-timeout 5
dialer string 839 class dial1
dialer pool 1
dialer-group 1
ppp callback accept
ppp authentication chap
!
ip classless
!
!
map-class dialer dial1
dialer callback-server username
dialer-list 1 protocol ip permit
!
line con 0
login
transport input none
line aux 0
line vty 0 4
password cisco
login
!
end
DEBUG
router#sh debug
Dial on demand:
Dial on demand events debugging is on
PPP:
PPP protocol negotiation debugging is on
PPP Callback Control Protocol debugging is on
ISDN:
ISDN events debugging is on
ISDN Q931 packets debugging is on
Callback:
Callback activity debugging is on
04:42:58: ISDN BR0: Recvd MPH_IIC_IND from L1
04:42:59: ISDN BR0: L1 is IF_ACTIVE
04:42:59: ISDN BR0: RX <- SETUP pd = 8 callref = 0x60
04:42:59: Sending Complete
04:42:59: Bearer Capability i = 0x8890
04:42:59: Channel ID i = 0x89
04:42:59: Calling Party Number i = 0x0181, '839'
04:42:59: Called Party Number i = 0x81, '886'
04:42:59: ISDN BR0: RX <- SETUP pd = 8 callref = 0x61
04:42:59: Sending Complete
04:42:59: Bearer Capability i = 0x8890
04:42:59: Channel ID i = 0x8A
04:42:59: Calling Party Number i = 0x0181, '839'
04:42:59: Called Party Number i = 0x81, '886'
04:42:59: ISDN BR0: Incoming call id = 0x2F
04:42:59: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0, TEI 74 changed to up
04:42:59: ISDN BR0: received HOST_INCOMING_CALL call_id 0x2F
04:42:59: ISDN BR0: Event: Received a call from 839 on B1 at 64 Kb/s
04:42:59: ISDN BR0: Event: Accepting the call id 0x2F
04:42:59: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
04:42:59: BR0:1 PPP: Treating connection as a callin
04:42:59: BR0:1 PPP: Phase is ESTABLISHING, Passive Open
04:42:59: BR0:1 LCP: State is Listen
04:42:59: ISDN BR0: Incoming call id = 0x30
04:42:59: ISDN BR0: received HOST_INCOMING_CALL call_id 0x30
04:42:59: ISDN BR0: Event: Received a call from 839 on B2 at 64 Kb/s
04:42:59: ISDN BR0: Event: Accepting the call id 0x30
04:42:59: %LINK-3-UPDOWN: Interface BRI0:2, changed state to up
04:42:59: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 839
04:42:59: BR0:2 PPP: Treating connection as a callin
04:42:59: BR0:2 PPP: Phase is ESTABLISHING, Passive Open
04:42:59: BR0:2 LCP: State is Listen
04:42:59: L3: Multi NLCB DL_EST cid 0x2F cr 0xE0 ev 0x81 ces 1 dsl 0
04:42:59: U0_BadMsg: CC_REL_CONF sent cid 0x2F cr 0xE0 ev 0x81 ces 1 dsl 0
04:42:59: ISDN BR0: received HOST_DISCONNECT_ACK call_id 0x2F
04:42:59: %ISDN-6-CONNECT: Interface BRI0:2 is now connected to 839
04:42:59: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
04:42:59: BR0:1 LCP: State is Closed
04:42:59: BR0:1 PPP: Phase is DOWN
04:42:59: BR0:1 DDR: disconnecting call
04:42:59: ISDN BR0: TX -> CONNECT pd = 8 callref = 0xE1
04:42:59: ISDN BR0: RX <- CONNECT_ACK pd = 8 callref = 0x61
04:42:59: BR0:2 LCP: I CONFREQ [Listen] id 0 len 30
04:42:59: BR0:2 LCP: MagicNumber 0x0EF262D0 (0x05060EF262D0)
04:42:59: BR0:2 LCP: PFC (0x0702)
04:42:59: BR0:2 LCP: ACFC (0x0802)
04:42:59: BR0:2 LCP: Callback 6 (0x0D0306)
04:42:59: BR0:2 LCP: MRRU 1614 (0x1104064E)
04:42:59: BR0:2 LCP: EndpointDisc 3 00d0.592f.7e09 (0x13090300D0592F7E09)
04:42:59: BR0:2 LCP: O CONFREQ [Listen] id 17 len 32
04:42:59: BR0:2 LCP: AuthProto CHAP (0x0305C22305)
04:42:59: BR0:2 LCP: MagicNumber 0x010F555A (0x0506010F555A)
04:42:59: BR0:2 LCP: MRRU 1524 (0x110405F4)
04:42:59: BR0:2 LCP: EndpointDisc 1 Local (0x130D016E6578746972616F6E65)
04:42:59: BR0:2 LCP: O CONFREJ [Listen] id 0 len 7
04:42:59: BR0:2 LCP: Callback 6 (0x0D0306)
04:42:59: BR0:2 LCP: I CONFACK [REQsent] id 17 len 32
04:42:59: BR0:2 LCP: AuthProto CHAP (0x0305C22305)
04:42:59: BR0:2 LCP: MagicNumber 0x010F555A (0x0506010F555A)
04:42:59: BR0:2 LCP: MRRU 1524 (0x110405F4)
04:42:59: BR0:2 LCP: EndpointDisc 1 Local (0x130D016E6578746972616F6E65)
04:42:59: BR0:2 LCP: I CONFREQ [ACKrcvd] id 1 len 27
04:42:59: BR0:2 LCP: MagicNumber 0x0EF262D0 (0x05060EF262D0)
04:42:59: BR0:2 LCP: PFC (0x0702)
04:42:59: BR0:2 LCP: ACFC (0x0802)
04:42:59: BR0:2 LCP: MRRU 1614 (0x1104064E)
04:42:59: BR0:2 LCP: EndpointDisc 3 00d0.592f.7e09 (0x13090300D0592F7E09)
04:42:59: BR0:2 LCP: O CONFACK [ACKrcvd] id 1 len 27
04:42:59: BR0:2 LCP: MagicNumber 0x0EF262D0 (0x05060EF262D0)
04:42:59: BR0:2 LCP: PFC (0x0702)
04:42:59: BR0:2 LCP: ACFC (0x0802)
04:42:59: BR0:2 LCP: MRRU 1614 (0x1104064E)
04:42:59: BR0:2 LCP: EndpointDisc 3 00d0.592f.7e09 (0x13090300D0592F7E09)
04:42:59: BR0:2 LCP: State is Open
04:42:59: BR0:2 MCB: Initialize
04:42:59: BR0:2 PPP: Phase is AUTHENTICATING, by this end
04:42:59: BR0:2 CHAP: O CHALLENGE id 14 len 31 from "router"
04:42:59: BR0:2 LCP: I IDENTIFY [Open] id 2 len 18 magic 0x0EF262D0 MSRASV5.00
04:42:59: BR0:2 LCP: I IDENTIFY [Open] id 3 len 22 magic 0x0EF262D0 MSRAS-1-CONIJP
04:42:59: BR0:2 CHAP: I RESPONSE id 14 len 25 from "test"
04:42:59: BR0:2 CHAP: O SUCCESS id 14 len 4
04:42:59: %DIALER-6-BIND: Interface BR0:2 bound to profile Di1
04:42:59: BR0:2 PPP: Phase is VIRTUALIZED
04:42:59: Vi1 MCB: Initialize
04:42:59: Vi1 PPP: Phase is DOWN, Setup
04:42:59: %DIALER-6-BIND: Interface Vi1 bound to profile Di1
04:42:59: BR0:2 CCP: Packet buffered while building MLP bundle interface
04:42:59: BR0:2 IPCP: Packet buffered while building MLP bundle interface
04:42:59: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
04:42:59: Vi1 PPP: Treating connection as a callin
04:42:59: Vi1 PPP: Phase is ESTABLISHING, Passive Open
04:42:59: Vi1 LCP: State is Listen
04:42:59: Vi1 MCB: Initialize
04:42:59: Vi1 PPP: Phase is UP
04:42:59: Vi1 IPCP: O CONFREQ [Closed] id 1 len 10
04:42:59: Vi1 IPCP: Address 192.168.2.2 (0x0306C0A80202)
04:42:59: Vi1 CDPCP: O CONFREQ [Closed] id 1 len 4
04:42:59: Vi1 PPP: Pending ncpQ size is 2
04:42:59: BR0:2 CCP: Redirect packet to Vi1
04:42:59: Vi1 CCP: I CONFREQ [Not negotiated] id 4 len 10
04:42:59: Vi1 CCP: MS-PPC supported bits 0x00000001 (0x120600000001)
04:42:59: Vi1 LCP: O PROTREJ [Open] id 1 len 16 protocol CCP (0x80FD0104000A1206
00000001)
04:42:59: BR0:2 IPCP: Redirect packet to Vi1
04:42:59: Vi1 IPCP: I CONFREQ [REQsent] id 5 len 40
04:42:59: Vi1 IPCP: CompressType VJ 15 slots CompressSlotID (0x0206002D0F01)
04:42:59: Vi1 IPCP: Address 192.168.2.1 (0x0306C0A80201)
04:42:59: Vi1 IPCP: PrimaryDNS 0.0.0.0 (0x810600000000)
04:42:59: Vi1 IPCP: PrimaryWINS 0.0.0.0 (0x820600000000)
04:42:59: Vi1 IPCP: SecondaryDNS 0.0.0.0 (0x830600000000)
04:42:59: Vi1 IPCP: SecondaryWINS 0.0.0.0 (0x840600000000)
04:42:59: Vi1 IPCP: O CONFREJ [REQsent] id 5 len 34
04:42:59: Vi1 IPCP: CompressType VJ 15 slots CompressSlotID (0x0206002D0F01)
04:42:59: Vi1 IPCP: PrimaryDNS 0.0.0.0 (0x810600000000)
04:42:59: Vi1 IPCP: PrimaryWINS 0.0.0.0 (0x820600000000)
04:42:59: Vi1 IPCP: SecondaryDNS 0.0.0.0 (0x830600000000)
04:42:59: Vi1 IPCP: SecondaryWINS 0.0.0.0 (0x840600000000)
04:42:59: Vi1 IPCP: I CONFACK [REQsent] id 1 len 10
04:42:59: Vi1 IPCP: Address 192.168.2.2 (0x0306C0A80202)
04:42:59: BR0:2 LCP: I PROTREJ [Open] id 6 len 10 protocol CDPCP (0x820701010004
)
04:42:59: Vi1 CDPCP: State is Closed
04:42:59: Vi1 IPCP: I CONFREQ [ACKrcvd] id 7 len 10
04:42:59: Vi1 IPCP: Address 192.168.2.1 (0x0306C0A80201)
04:42:59: Vi1 IPCP: O CONFACK [ACKrcvd] id 7 len 10
04:42:59: Vi1 IPCP: Address 192.168.2.1 (0x0306C0A80201)
04:42:59: Vi1 IPCP: State is Open
04:42:59: Vi1 DDR: dialer protocol up
04:42:59: Vi1 DDR: callback server and dialer protocol up ?- must be mlp
04:42:59: Di1 IPCP: Install route to 192.168.2.1
04:43:00: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:2, changed state
to up
04:43:00: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, chang
ed state to up
06-18-2003 06:14 AM
DEBUG part 2:
04:43:02: ISDN BR0: RX <- SETUP pd = 8 callref = 0x60
04:43:02: Sending Complete
04:43:02: Bearer Capability i = 0x8890
04:43:02: Channel ID i = 0x89
04:43:02: Calling Party Number i = 0x0181, '839'
04:43:02: Called Party Number i = 0x81, '886'
04:43:02: ISDN BR0: Incoming call id = 0x31
04:43:02: ISDN BR0: received HOST_INCOMING_CALL call_id 0x31
04:43:02: ISDN BR0: Event: Received a call from 839 on B1 at 64 Kb/s
04:43:02: ISDN BR0: Event: Accepting the call id 0x31
04:43:02: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
04:43:02: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 839
04:43:02: BR0:1 PPP: Treating connection as a callin
04:43:02: BR0:1 PPP: Phase is ESTABLISHING, Passive Open
04:43:02: BR0:1 LCP: State is Listen
04:43:02: ISDN BR0: TX -> CONNECT pd = 8 callref = 0xE0
04:43:03: ISDN BR0: RX <- CONNECT_ACK pd = 8 callref = 0x60
04:43:04: BR0:1 LCP: TIMEout: State Listen
04:43:04: BR0:1 LCP: O CONFREQ [Listen] id 51 len 32
04:43:04: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
04:43:04: BR0:1 LCP: MagicNumber 0x010F6B16 (0x0506010F6B16)
04:43:04: BR0:1 LCP: MRRU 1524 (0x110405F4)
04:43:04: BR0:1 LCP: EndpointDisc 1 Local (0x130D016E6578746972616F6E65)
04:43:06: BR0:1 LCP: I CONFREQ [REQsent] id 0 len 30
04:43:06: BR0:1 LCP: MagicNumber 0x64AB047B (0x050664AB047B)
04:43:06: BR0:1 LCP: PFC (0x0702)
04:43:06: BR0:1 LCP: ACFC (0x0802)
04:43:06: BR0:1 LCP: Callback 6 (0x0D0306)
04:43:06: BR0:1 LCP: MRRU 1614 (0x1104064E)
04:43:06: BR0:1 LCP: EndpointDisc 3 00d0.592f.7e09 (0x13090300D0592F7E09)
04:43:06: BR0:1 LCP: O CONFREJ [REQsent] id 0 len 7
04:43:06: BR0:1 LCP: Callback 6 (0x0D0306)
04:43:06: BR0:1 LCP: I CONFACK [REQsent] id 51 len 32
04:43:06: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
04:43:06: BR0:1 LCP: MagicNumber 0x010F6B16 (0x0506010F6B16)
04:43:06: BR0:1 LCP: MRRU 1524 (0x110405F4)
04:43:06: BR0:1 LCP: EndpointDisc 1 Local (0x130D016E6578746972616F6E65)
04:43:06: BR0:1 LCP: I CONFREQ [ACKrcvd] id 1 len 27
04:43:06: BR0:1 LCP: MagicNumber 0x64AB047B (0x050664AB047B)
04:43:06: BR0:1 LCP: PFC (0x0702)
04:43:06: BR0:1 LCP: ACFC (0x0802)
04:43:06: BR0:1 LCP: MRRU 1614 (0x1104064E)
04:43:06: BR0:1 LCP: EndpointDisc 3 00d0.592f.7e09 (0x13090300D0592F7E09)
04:43:06: BR0:1 LCP: O CONFACK [ACKrcvd] id 1 len 27
04:43:06: BR0:1 LCP: MagicNumber 0x64AB047B (0x050664AB047B)
04:43:06: BR0:1 LCP: PFC (0x0702)
04:43:06: BR0:1 LCP: ACFC (0x0802)
04:43:06: BR0:1 LCP: MRRU 1614 (0x1104064E)
04:43:06: BR0:1 LCP: EndpointDisc 3 00d0.592f.7e09 (0x13090300D0592F7E09)
04:43:06: BR0:1 LCP: State is Open
04:43:06: BR0:1 MCB: Initialize
04:43:06: BR0:1 PPP: Phase is AUTHENTICATING, by this end
04:43:06: BR0:1 CHAP: O CHALLENGE id 14 len 31 from "router"
04:43:06: BR0:1 LCP: I IDENTIFY [Open] id 2 len 18 magic 0x64AB047B MSRASV5.00
04:43:06: BR0:1 LCP: I IDENTIFY [Open] id 3 len 22 magic 0x64AB047B MSRAS-1-CONI
JP
04:43:06: BR0:1 CHAP: I RESPONSE id 14 len 25 from "test"
04:43:06: BR0:1 CHAP: O SUCCESS id 14 len 4
04:43:06: %DIALER-6-BIND: Interface BR0:1 bound to profile Di1
04:43:06: BR0:1 PPP: Phase is VIRTUALIZED
04:43:07: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed state
to up
04:43:08: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 839 test
04:43:19: Vi1 PPP: Outbound cdp packet dropped, CDPCP is Closed [starting negoti
ations]
04:43:19: Vi1 CDPCP: State is Closed
04:43:19: Vi1 CDPCP: TIMEout: State Closed
04:43:19: Vi1 CDPCP: State is Listen
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide