Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

MS exchange (cluster IP) & HSRP -- please help!!!

from some vlans i cannot ping the virtual ip add of the exchange cluster, but can ping the nic ip add. when i do a "sh ip arp vlan 100" in router-16, i can see the entries for the all ip add, including virtual cluster ip.

when i do same in router-15, the cluster virtual ip arp entry do not show.

please help!

below sh ver of the msfc

Cisco Internetwork Operating System Software

IOS (tm) MSFC Software (C6MSFC-IS-M), Version 12.0(7)XE1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

TAC:Home:SW:IOS:Specials for info

Copyright (c) 1986-2000 by cisco Systems, Inc.

Compiled Fri 04-Feb-00 00:28 by lstringr

Image text-base: 0x60008900, data-base: 0x60CBC000

ROM: System Bootstrap, Version 12.0(3)XE, RELEASE SOFTWARE

BOOTFLASH: MSFC Software (C6MSFC-BOOT-M), Version 12.0(7)XE1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Router-15 uptime is 6 days, 11 hours, 18 minutes

System returned to ROM by power-on at 00:36:02 UTC Sat Jan 1 2000

Running default software

cisco Cat6k-MSFC (R5000) processor with 122880K/8192K bytes of memory.

Processor board ID SAD04281CBM

R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache

Last reset from power-on

Bridging software.

X.25 software, Version 3.0.0.

13 Virtual Ethernet/IEEE 802.3 interface(s)

123K bytes of non-volatile configuration memory.

4096K bytes of packet SRAM memory.

16384K bytes of Flash internal SIMM (Sector size 256K).

Configuration register is 0x2102

3 REPLIES

Re: MS exchange (cluster IP) & HSRP -- please help!!!

Could you post the configs

Thanks

Jorge

New Member

Re: MS exchange (cluster IP) & HSRP -- please help!!!

Hi Jorge,

This was the same problem as the other one that you answered "HSRP".

Therefore it is resolved.

Thanks anyway for your response.

Re: MS exchange (cluster IP) & HSRP -- please help!!!

Sounds good.

Rgds

104
Views
0
Helpful
3
Replies