01-03-2003 04:27 AM - edited 03-02-2019 03:55 AM
from some vlans i cannot ping the virtual ip add of the exchange cluster, but can ping the nic ip add. when i do a "sh ip arp vlan 100" in router-16, i can see the entries for the all ip add, including virtual cluster ip.
when i do same in router-15, the cluster virtual ip arp entry do not show.
please help!
below sh ver of the msfc
Cisco Internetwork Operating System Software
IOS (tm) MSFC Software (C6MSFC-IS-M), Version 12.0(7)XE1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC:Home:SW:IOS:Specials for info
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Fri 04-Feb-00 00:28 by lstringr
Image text-base: 0x60008900, data-base: 0x60CBC000
ROM: System Bootstrap, Version 12.0(3)XE, RELEASE SOFTWARE
BOOTFLASH: MSFC Software (C6MSFC-BOOT-M), Version 12.0(7)XE1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Router-15 uptime is 6 days, 11 hours, 18 minutes
System returned to ROM by power-on at 00:36:02 UTC Sat Jan 1 2000
Running default software
cisco Cat6k-MSFC (R5000) processor with 122880K/8192K bytes of memory.
Processor board ID SAD04281CBM
R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
13 Virtual Ethernet/IEEE 802.3 interface(s)
123K bytes of non-volatile configuration memory.
4096K bytes of packet SRAM memory.
16384K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
01-03-2003 09:30 AM
Could you post the configs
Thanks
Jorge
01-05-2003 11:19 AM
Hi Jorge,
This was the same problem as the other one that you answered "HSRP".
Therefore it is resolved.
Thanks anyway for your response.
01-05-2003 03:11 PM
Sounds good.
Rgds
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide