Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

MSFC Installed, What's next?

I recieved a new MSFC II, installed it onto a Cat6K-Sup1A.

When I do a show Ver, no MSFC.

The bootstrap ROM is Version: 5.2(1)

The Sup1A Software is Version: 5.3(1a)CSX with 65Mb DRam

The documentation supplied with the MSFCII shows only how to screw it onto the Sup1A card, Can't find any documentation on the Cisco Site to install the MSFC other than to back up the config to a TFTP Server.

Help ----Mike

1 REPLY
Cisco Employee

Re: MSFC Installed, What's next?

Did the Sup have an MSFC and you upgraded to an MSFC2?. Sup minimum software requirement for an MSFC2 is 5.4(3) or later

http://cio.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_10605.htm#xtocid71104

ALso the following page should help

http://www.cisco.com/warp/public/473/124.html

88
Views
0
Helpful
1
Replies
CreatePlease to create content