Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MSFC problem

My company have a Catalyst 6506 with two supervisor engines (WS-X6K-SUP1A-2GE)and both appear to work fine althougt the system LED is red, both in primary and secondary.

Does anyone have any clue about it?

Thanks

Eduardo Ribeiro

5 REPLIES
New Member

Re: MSFC problem

Do a show mod, you may see both of them faculty as the status.

a) Do a "show system" and you would probably see something is faulty.

You need two power supply for the system to come out faulty status.

b) you can also do a show test 1 and show test 2.

to see anything if faculty

Please use the following doc

http://www.cisco.com/warp/public/473/95.html

New Member

Re: MSFC problem

Make sure that both power supplies are on. If one of them is off, system LED on both supervisory modules lits to indicate this.

New Member

Re: MSFC problem

Thanks,

But using the show test 2, i discovered that the EOBC is faulty. How can i solve this problem?

New Member

Re: MSFC problem

Most likely a hardware failure. But you can try reseating the module to see if that helps.

New Member

Re: MSFC problem

But what is this Ethernet Out-of-Band Channel? What it does?

123
Views
0
Helpful
5
Replies
CreatePlease login to create content