Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

MSFC recovery

If the MSFC bootflash has the wrong image, is XMODEM the only way to load a new image on the MSFC ?

  • Other Network Infrastructure Subjects
5 REPLIES
Cisco Employee

Re: MSFC recovery

Yes..You can XMODEM a bootldr image which is a smaller image and hence a lot quicker. Once the MSFC boots off bootldr, use TFTP to get the correct images onto the bootflash

New Member

Re: MSFC recovery

Is there a way to sync the images on both the bootflashes of MSFC2 on primary and secondary supervisors, using any command. I know that the Cat OS image does synchronise automatically.

Cisco Employee

Re: MSFC recovery

No..The MSFC IOS images does not syncronize.

New Member

Re: MSFC recovery

Why is it that I cannot access the console port of the secondary supervisor? is it because its in standby mode?>

Cisco Employee

Re: MSFC recovery

Yep..Console port of standby Supervisor is disabled. If you want to access the MSFC in slot 16, issue a "switch console 16" and then move your console cable to Supervisor in slot 2

99
Views
0
Helpful
5
Replies