Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Mulitlink PPP over 5 internet T1's

Is is possible to use regular HDLC internet T1's with MLPP or do they have to be ppp lines, as the name implies?

1 REPLY
VIP Purple

Re: Mulitlink PPP over 5 internet T1's

Hello,

Router#conf t

Router(config)#int s1

Router(config-if)#encapsulation hdlc

Router(config-if)#ppp multilink

Must set encapsulation to PPP before using PPP subcommands

I don´t think this will work. But you can create a multilink interface and assign the HDLC-encapsulated T1s to that interface to create a multilink bundle:

Router#conf t

Router(config)#interface multilink 1

Router(config-if)#exit

Router(config)#interface serial 1

Router(config-if)#multilink-group 1

Router(config-if)#end

Router#

Regards,

Georg

231
Views
5
Helpful
1
Replies
CreatePlease login to create content