I am facing problem with multicasting , where I have 7206 router as RP (central location) . In remote location it is 3640 Router. I have 2 links from remote location to central router.
We have PIM ver-1 enabled, with sparse-dense-mode.The IOS ver used is the 12.2.13B.
It is found in specific link all unicast traffic is working fine.But it is giving problem with multicasting. The video quality whith specific link is very poor.I have tried moving ports and router but the effect was same. Please let me know if anybody faced this problem and any workaround for this problem.
One thing you have not provided is details on your design and or the config. If you are having problems with video quality, the first thing I think about is contention on that link. Is there enough bandwidth to support the video stream? Do you have QOS on the link?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...