Focus on Multicasting on IP Networks and disregard the appletalk portion. There are not L2 devices such as 2950 in the example but 2950 have IGMP Snooping enabled by default and it's really all you need at the Layer 2.
The hardware you list is perfect for multicasting. If you use the 3550's for inter-VLAN routing you must have the IP Services image (EI), since the IP Base (SI) doesn't support inter-VLAN Multicast Routing. The 2950 has IGMP Snooping enabled by default and the routers (7200 & 3600) will support multicast routing in any feature set.
You need to decide whether to use Sparse or Dense mode (Explicit Joins or Flood & Prune). Sparse-Mode seems to be the preferred method but this requires slightly more configuration.
Assuming that the 3550 is not doing any L3 functions, nothing, as you said IGMP snooping is enabled by default on these teo platfporms. If 7200 and 3550 are talking at L3, then you must ensure that multicast routing is enable and pim are enabled on relevant vlans.
L3 3550 is not doing any Layer 3 function, just working as a VTP server, and some QOS is implemented on it. One thing more can u please tell me a best software which i can use for multicasting Server...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.