Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Multilink Frame-relay on Frame-ATM internetworking circuit

Is it possible to configure multilink Frame-relay on a Frame-ATM internetworking circuit.

We have a E1 Frame circuit with 2 Meg Frame-ATM internetworking, and now there is a requirement to have 4 Meg PVC. However, since ATM is not available at the remote site and we need to check if configuring Multilink Frame-relay will solve the problem.

1 REPLY
New Member

Re: Multilink Frame-relay on Frame-ATM internetworking circuit

I believe you can do and make sure your service provider will be able to support the MFR. So they will terminate the MFR and translate to ATM.

Here is the useful link.

http://www.cisco.com/en/US/tech/tk652/tk692/technologies_tech_note09186a00800b6098.shtml

Cheers

/Bessie

95
Views
0
Helpful
1
Replies