I configured 4 VC12s from one router to another and combined them into one MFR interface. Then, I made several connections via 'connect' command, some of them have more than 500Kbit/s. And summary traffic on all VC's is more than 4Mbit/s (if we use several E1 subinterfaces for this traffic without MFR).
In default MFR configuration, total speed on MFR link does not exceed 400Kbit/s. If I change 'multilink output-threshold' on MFR interface to 256000, total performance raises up to 2.2 Mbit/s but no more. If I turn on 'frame-relay traffic-shaping', total speed on the MFR interface drops to 300Kbit/s (all map-classes are configured, and sho frame-r pvc NNN shows that shaping is not active).
CPU utilisation on NPE300 - 30%, NPE400 - 4%. IOS version - 12.2(15)T5.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.