10-05-2001 06:04 PM - edited 03-01-2019 06:50 PM
Can I assign more than one IP address for my ethernet interface? If so, how do I do that?
Thanks!
10-05-2001 08:02 PM
under interface configuration add the selected ip address as a secondary:
int f0/4
ip address 10.1.1.1 255.255.255.0
ip address 10.1.2.1 255.255.255.0
-Steve
10-05-2001 08:21 PM
hmm, tried that while in a telnet session. When I did the second ip address, it disconnected me. I thought I had over written my good one.
Is there a limit to how many I can add? I have 9.
10-06-2001 04:27 AM
Go to interface configuration mode and do the following:
ip address 10.1.1.1 255.255.255.0 secondary
You can add two IP addresses on an interface.
Thanks
kanwal
10-07-2001 11:33 PM
sorry, forgot to add the secondary command on the second one
10-08-2001 03:24 PM
Yes.
Just create a secondary interface
ip address x.x.x.x x.x.x.x secondary
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: