Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Multiple IP addresses on ONE interface

I'm cutting over an old ip range to a new but I need to run them both how do I configure a secondary IP address on eth0?

1 ACCEPTED SOLUTION

Accepted Solutions
Green

Re: Multiple IP addresses on ONE interface

First address:

- config t

- int e0

- ip addr 192.178.1.254 255.255.255.0

--ip addr 10.10.10.254 255.255.255.0 SECONDARY

(repeat the second address sequence as necessary)

All configs after the first address are "SECONDARY"

Good Luck

Scott

2 REPLIES

Re: Multiple IP addresses on ONE interface

ip address

ip address secondary

Green

Re: Multiple IP addresses on ONE interface

First address:

- config t

- int e0

- ip addr 192.178.1.254 255.255.255.0

--ip addr 10.10.10.254 255.255.255.0 SECONDARY

(repeat the second address sequence as necessary)

All configs after the first address are "SECONDARY"

Good Luck

Scott

148
Views
5
Helpful
2
Replies
CreatePlease login to create content