Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Multiple PVC's Multiple Default Routes/Cisco 26xx?

Is it possible to configure the following, and if so... how?

Configuration:

3 sites, frame relay. Site A has 3 pvc's. One to site B, one to site C, and one to an Internet connection. Sites B & C have two pvc's. Site B has one to sites A&C and site C has one to sites A&B. The site A default route is set to the Internet PVC, sites B & C go out to the Internet through site A's default route.

What we would like to do is set this up so that sites B & C's default Internet route goes out a different route than what the default Internet route of site A is...

Thank you in advance for any assistance.

1 REPLY
Cisco Employee

Re: Multiple PVC's Multiple Default Routes/Cisco 26xx?

One way to acheive this is by using policy routing on router A. You will need to specify in your policy statements that traffic originating from ip subnets belonging to router B and router C needs to be routed out the desired internet bound interface. For more on policy routing see:

http://www.cisco.com/warp/public/cc/techno/protocol/tech/plicy_wp.htm

AND

http://www.cisco.com/warp/public/105/36.html

94
Views
0
Helpful
1
Replies
CreatePlease to create content