I have a user with a Linux server running two different subnets (let's say 220.127.116.11 and 18.104.22.168) through a single fast ethernet connection. He connects to a 3548. The 3548 is trunked up to a 6509 with an MSFC2.
I cannot get the second ip subnet to work. I have tried multiple VLANs on the 3548 port. I have also tried a single VLAN with a secondary address on the 6509.
I believe the problem is that the server has a single default route on the 22.214.171.124 network and the MSFC does not know how to get back to the 126.96.36.199 network when traffic is sourced from the 188.8.131.52 default route. I hope this makes sense.
Is there a way I can get this server to communicate with both subnet through the architecture described above?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.