How many ports on a 2950 can be configured as dot1q trunks? I need to place an intermediary switch in my network to pass trunk data beween 10 other Cisco switches and therefore need to configure 10 ports as trunk ports. Is this possible or would a different switch work better for this purpose?
There's no limitation on the number of trunk ports you can configure. However, there is a switch-wide limitation of 64 instances of Spanning Tree. In other words, you can only have 64 active VLANs on the switch.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...