I need two switches configured with the same VTP domain (eg Cisco1) exchange VTP PDU's, the problem is that these computers are physically interconnected by computers in another VTP domain (Cisco2 example). This problem is due to a pretty big network infrastructure are distributed devices WS-C2960-48TC-S which accept only 64 VLAN's and when updating their VLAN database with more than 64 VLAN´s are automatically configured in transparent mode.
1. Place SW2 into the same VTP domain (Cisco1) as the rest of the network.
2. Place SW2 into transparent mode running VTPv2. Depending on the IOS version you are running, this should allow SW2 to transparently forward the VTP BPDUs between SW1 and SW3 without the requirement of being in the same VTP domain.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.