Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

MVS Sysplex Distributor and MNLB

We are planning a configuration with two Sysplex Distributors situated in two separate MVS logical Partitions.

We have only two forwarding agents (6506) which are shared by all the partitions.

So we will have two Service Managers which share two forwarding agents

What is the best way to code this in the 6506?

Should we code only one "ip casa" definition which will be shared by both Service Manager as follow:

ip multicast-routing

ip casa 1.1.1.1 224.0.1.2

forwarding-agent 1637

or should we code one "ip casa" definition per service manager as follow:

ip multicast-routing

ip casa 1.1.1.1 224.0.1.2

forwarding-agent 1637

ip casa 1.1.1.1 224.0.1.4

forwarding-agent 1638

Thanks in advance for your help, Gerard

1 REPLY

Re: MVS Sysplex Distributor and MNLB

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

151
Views
0
Helpful
1
Replies
CreatePlease to create content