You are thinking decimal when we are dealing with binaries here.
So, if we define a range such as ccccc we are dealing with a range of chanels from 0 to 2^5 (32). No way to limit that to 30. If you preappend it with a pppppccccc, you are then dealing with a range of 0 to 32 ports, and 0 to 32 channels. This is the only way to maximime the use of the 32 bits allowed under NAS Port (attr 5).
The problems with format a and b is that they were in decimal and
could not represent the information needed within the 32 bits
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...