Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

NAT and doing destination translation?

I need to know if it is at all possible to

translate the destination ip address to a static ip address ?

I can do this when translating the source address but need to know if its possible when I need to translate the destination address?

1 REPLY
New Member

Re: NAT and doing destination translation?

It can be done using the "ip nat outside source static x.x.x.x x.x.x.x" command. Look at the following link to get more details:

http://www.cisco.com/en/US/partner/tech/tk648/tk361/technologies_configuration_example09186a0080093f2f.shtml

You need to understand NAT order of operation to understand this concept:

http://www.cisco.com/en/US/partner/tech/tk648/tk361/technologies_tech_note09186a0080133ddd.shtml

I hope this will help you.

136
Views
0
Helpful
1
Replies
CreatePlease login to create content