Hi,
Dynamic NAT is not working with the following config. Could you assist with configuration.
Thanks.
Said
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname NAT
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
ip subnet-zero
ip cef
!
!
no ip domain lookup
!
ip audit po max-events 100
no ftp-server write-enable
!
!
!
!
interface Ethernet0/0
ip address 193.168.1.1 255.255.255.0
ip nat inside
half-duplex
!
interface TokenRing0/0
no ip address
shutdown
ring-speed 16
!
interface Serial1/0
ip address 200.200.100.1 255.255.255.252
ip nat outside
no fair-queue
!
interface Serial1/1
no ip address
shutdown
!
interface Serial1/2
no ip address
shutdown
!
interface Serial1/3
no ip address
shutdown
!
ip nat pool public 200.200.100.129 200.200.100.250 netmask 255.255.255.128
ip nat inside source list 1 pool public
ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 200.200.100.2
!
!
access-list 1 permit 193.168.1.0 0.0.0.255
!
line con 0
exec-timeout 0 0
line aux 0
line vty 0 4
login
!
!
end
