Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

NAT external to internal

i am having trouble with NAT. it is my first try at this and need some help, please. I have a 2610 with 2 Fastethernet connections. fa1/0 is internal 10.10.10.1/24

fa0/0 is external 66.73.xx.xx/26

i can succsefully go internal out to external with the ip nat inside source list 1 int fa0/0 overload command.

what is the command to allow external to internal. thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Community Member

Re: NAT external to internal

ip nat inside source static 10.10.10.10 66.73.xx.xx will give you a full translation bi-directional

5 REPLIES
Community Member

Re: NAT external to internal

What is an example of what you are trying to do? Send traffic to a web server or something?

Community Member

Re: NAT external to internal

tcp port 5900 for vnc is one thing.

Community Member

Re: NAT external to internal

I think these should help depending on your exact scenario.

Static NAT

ip nat inside source {static {esp local-ip interface type number | local-ip global-ip}} [extendable | mapping-id map-id | no-alias | no-payload | redundancy group-name | route-map | vrf name]

no ip nat inside source {static {esp local-ip interface type number | local-ip global-ip}} [extendable | mapping-id map-id | no-alias | no-payload | redundancy group-name | route-map | vrf name]

Port Static NAT

ip nat inside source {static {tcp | udp {local-ip local-port global-ip global-port | interface global-port}} [extendable | mapping-id map-id | no-alias | no-payload | redundancy group-name | route-map | vrf name]

no ip nat inside source {static {tcp | udp {local-ip local-port global-ip global-port | interface global-port}} [extendable | mapping-id map-id | no-alias | no-payload | redundancy group-name | route-map | vrf name]

Here is the link to the doc for NAT for more details on NAT

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hiad_r/adr_i2h.htm#wp1178184

Community Member

Re: NAT external to internal

i wish i could say this is helping, however, it is not. i guess i just need a way to NAT 66.73.xx.xx into 10.10.10.10

Community Member

Re: NAT external to internal

ip nat inside source static 10.10.10.10 66.73.xx.xx will give you a full translation bi-directional

128
Views
0
Helpful
5
Replies
CreatePlease to create content