NAT from inside the network

[dschuemann]

I have a 807 router and when im inside the network and I go to remaxvoguerealty.com which the webserver is inside the network, I get a connection refused. Outside of the network it works fine.

Here are the NAT configs

ip nat inside source list 102 interface Ethernet1 overload

ip nat inside source static tcp 192.168.0.5 22 interface Ethernet1 22

ip nat inside source static tcp 192.168.0.1 23 interface Ethernet1 23

ip nat inside source static tcp 192.168.0.5 25 interface Ethernet1 25

ip nat inside source static tcp 192.168.0.5 110 interface Ethernet1 110

ip nat inside source static tcp 192.168.0.5 53 interface Ethernet1 53

ip nat inside source static udp 192.168.0.5 53 interface Ethernet1 53

ip nat inside source static tcp 192.168.0.5 80 interface Ethernet1 80

ip nat inside source static tcp 192.168.0.5 443 interface Ethernet1 443

Thank you

[jolmo]

I suppose web server's IP address is 192.168.0.5. I think the problem is that when you try to access web server from the inside you use Ethernet1 as destination IP address, port 80. If this is right, NAT won't work so you're not trying to go outside. In fact, you actually are trying to access the router via web. If web configuration of the router is disabled you'll get connection refused.

So, from the inside, try to access to http://192.168.0.5. If you can reach the web server, then the problem is that one commented above. So you'll have to use that IP address to access from the inside.

Hope this helps