Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

NAT on 675

My customer is wanting to run both private and sanctioned IP address on a 675. He has a sanctioned network with a 255.255.255.248 mask and wants 1 of his servers to have a sanctioned address, but his 10 PC's to run 10net address with the 675 doing the NAT. Can he do this? If so how?

Thanks

2 REPLIES
New Member

Re: NAT on 675

New Member

Re: NAT on 675

On the Cisco 678 the syntax is:

set int eth0 10.#.#.# mask 255.0.0.0 up speed auto

(255.0.0.0 = your local subnet mask)

write

reboot

the 10.#.#.# is now the Gateway for the local lan.

Glenn

glenna@abelson.com

78
Views
0
Helpful
2
Replies