11-19-2003 05:16 AM - edited 03-02-2019 11:49 AM
Hi,
I need to configure the Internet access in my LAN. my 801 router will connect to the internet without any static IP (dial-up internet).
how to configure nat in my 801
regards
shoeb
11-19-2003 05:29 AM
1.Under your dialup interface (BRI/Dialer) which is connecting to ISPconfiguration say
" IP NAT OUTSIDE "
2.Under your LAN interface (BRI/Dialer) configuration say
" IP NAT INSIDE "
Under global configuration say.
3." IP ACCESS-LIST 100 PERMIT IP ANY ANY
4."IP NAT INSIDE SOURCE list 100 INTERFACE OVERLOAD BRI/DIALER "
11-19-2003 06:16 AM
so if my config will change like
!
interface Ethernet0
ip address 192.168.1.20 255.255.255.0
ip nat inside
no cdp enable
interface Dialer1
description CONNECTION TO INTERNET
ip address ?????? 255.255.255.0
no ip directed-broadcast
ip nat outside
what will be my dialer IP address ? will it be in the LAN subnet?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: