Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

NAT trouble on 826

Hello,

I have the following situation:

Internet

|

|

Cisco 826 WAN IP XXX.XXX.XXX.XXX

LAN IP 192.8.100.1

|

|

Mail server IP 192.8.100.3

I have the following Nat configuration:

ip nat pool buiten XXX.XXX.XXX.XXX XXX.XXX.XXX.XXX netmask 255.255.255.0

ip nat inside source list 7 pool buiten overload

ip nat inside source static tcp 192.8.100.3 25 XXX.XXX.XXX.XXX 25 extendable

ip classless

ip route 0.0.0.0 0.0.0.0 217.136.183.1

no ip http server

!

access-list 1 permit 192.8.100.0 0.0.0.255

access-list 7 permit 192.8.100.0 0.0.0.255

This doesn't work (There where a lot more translations, but I removed them, if 1 doesn't work non of them will)

Is there something wrong with the configuration (there has to be)?

Kind regards

Glenn Volckaert

(an analist programmer, not an network admin ;-)

1 REPLY

Re: NAT trouble on 826

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

90
Views
0
Helpful
1
Replies
CreatePlease to create content