Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Nat

hi there,

when i do static nating, every thing works fine when i give inside local address of a workstation for testing, but when i change to ip to server it stops working

but server can be pinged localty ,any idea y

regards

manish

6 REPLIES
Cisco Employee

Re: Nat

Pl. try to explain the issue with more detail. Also try to outline the diagram with required config which works and dosen't work.

Community Member

Re: Nat

here it is,

(server)--(router)-(internet)

i have to give access to my server through web becauseof exchange & web ,

if i do a static maping it work if i put any workstation's ip address

(ip nat inside source static INSIDELOCAL INSIDEGLOBAL) it works fine

i can ping from out side , but as soon i swith it to my server it dosent work

regards

Community Member

Re: Nat

one more thing, if i remove ip nat inside from FE0/0 , then i can ping the server

Cisco Employee

Re: Nat

Static mapping for inside to outside global ip address should work fine.

Many people are using it like that for their web servers and email servers which are located in the inside network.

What kind of server is that? Web, email?

You can use static port mapping as well with it. Here is the url which discuss that

http://www.cisco.com/warp/customer/794/827spat.html

Anyway, try to clear the nat by using "clear ip nat trans" command after you change the ip address mapping. Ping the outside ip address after that.

Community Member

Re: Nat

hi there,

thanks for you support, but this funny problem solved by itself , it took one or two hour , after that i could ping my server from outside with out any problem

with regards

Manish Young

Silver

Re: Nat

Since you have ip nat inside / outside means you have dynamic NATing enabled as well....now removing ip nat inside from FE0/0 (and it works) means you are killing the dynamic NAT process.

Need to execute "clear ip nat translation *" after we move over to the web server & attempt to ping from outside to the webserver.

Thanks, Mak.

101
Views
0
Helpful
6
Replies
CreatePlease to create content