I want to give a limited class of service to 1 subnet allowing only protocols like http, pop3, smtp and blocking or limiting everything else like kazaa, etc. Im running a 3662 with IOS 12.2(15)T1 (IP Plus) What would be the best configuration to accomplish this?? also can ACLs be applied to priority-maps or class maps?? as i only want these rules to apply to 1 subnet while hosts on another subnet have full access to the internet.
Thank for the help. Ive tried the ACLs and they work fine. So far i have the configuration pasted below. My question is how do i class the remaining traffic not defined in Bronze-Rules and limit it but restricting this rule to the Subnet defined by the ACL named Bronze-Networks. Also how do i allow the protocols defined by Bronze-Rules?
Ok, I used the config you recomended, here is what i saw, the "class class-default" rule captured all traffic from the other subnets seen by the router (Gold and Silver Subnets) and blocked it. How do i restrict the "class class-default" rule so it only blocks "unmatched" traffic for the subnet specified in the ACL Bronze-Networks. The config i used:
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.