Thanks for the info. I have read the info and tried but it doesn't seem to have any effect. All packets are still routed to the default 10.255.255.10. When I take out the ip route 0.0.0.0 0.0.0.0 10.255.255.10 statement, I can't get out at all. The config for this router is included. Thanks.
interface FastEthernet0/0
description 2LAN
ip address 10.24.1.1 255.255.0.0
duplex auto
speed auto
!
interface Serial0/0
description To Bellsouth
no ip address
encapsulation frame-relay
no ip mroute-cache
fair-queue
frame-relay lmi-type ansi
!
interface Serial0/0.103 point-to-point
description TO COHOST
ip address 10.255.255.9 255.255.255.252
ip summary-address eigrp 100 0.0.0.0 0.0.0.0 5
frame-relay interface-dlci 103
!
interface Serial0/1
description TO COHOST Second T1
no ip address
encapsulation frame-relay
no ip mroute-cache
frame-relay lmi-type ansi
!
interface Serial0/1.100 point-to-point
description PVC to 2nd T1
ip address 10.153.1.1 255.255.0.0
ip summary-address eigrp 100 0.0.0.0 0.0.0.0 5
frame-relay interface-dlci 100
!
router eigrp 100
network 10.0.0.0
no auto-summary
no eigrp log-neighbor-changes
!
ip classless
ip route 0.0.0.0 0.0.0.0 10.255.255.10
ip route 10.28.0.0 255.255.0.0 10.24.1.2
ip route 10.101.0.0 255.255.0.0 10.24.1.3
no ip http server
no ip pim bidir-enable
!
!
access-list 1 permit 10.24.0.0 0.0.255.255
access-list 2 permit 10.28.0.0 0.0.255.255
access-list 2 permit 10.101.0.0 0.0.255.255
route-map CMSSC permit 2
match ip address 2
set ip next-hop 10.255.255.10
!
route-map CHS permit 1
match ip address 1
set ip next-hop 10.153.1.2
!
end
