Need advise on the AS5300 IOS

[e.pesliak]

Currently running the c5300-jk2s-mz.121-6 image on the AS5300 with the 2.6.2.0 modem firmware. Thinking of upgrading to the "latest and greatest" :) but which one? Any recommendations on the most stable image/firmware?

Thanks,

Eugene Pesliak

[makchitale · Accepted solution]

12.2 mainline latest OR 12.2(2)XB latest , would prefer the later..it will also support V.92/ v.44.....they will have portware 2.9.4.0 built in.

Ensure you have enough flash / DRAM for the upgrade.

Please use appropriate modemcap as per URL below.

http://www.cisco.com/pcgi-bin/Support/browse/psp_view.pl?p=Internetworking:ASYNC&viewall=true

Thanks, Mak.

[aleksandar]

Hi!

Regarding to IOS upgrade issues. I've noticed that if You are using SMNP for making MRTG graphs, after You upgrade the IOS to the latest version, it is not displaying the correct values. The last OK results were with IOS 12.2.7c. Now I have 12.2.13a, and the MRTG are not correct. Any similar experiences? Any solutions? This happens on AS5300 and AS5400.

Regards, Aleksandar.