Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Need basic async configuration

Looking to connect two async devices across a ip network

Site A - 2620XM using WIC-2 A/S configured s0/1 = TTY 2

Site B - 3662 using NM-8 A/S configured 4/0 = TTY 129

Each of these ports will use an ip address as it is involved in PQ based on ACL using ip ranges. I bascially need to know the configuration to connect the ports together across the ip network, I have also configured the ports as dedicated async interfaces.

2 REPLIES
Silver

Re: Need basic async configuration

If I understand correctly, you are trying to do async tunneling:

http://cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080160c4d.shtml

Thanks, Mak

New Member

Re: Need basic async configuration

Thanks Mak

In addition to configuring the tunneling, I have given my serial interfaces their respective ip address's plus configured the physical layer as async, with its ip address selected as 'ip host' in the configuration, is anything else required?

Cheers

87
Views
0
Helpful
2
Replies