We are using 2620 router for accessing our ISP network. All of a sudden this router broke down. I connected this router through a console cable to my PC & tried to log in to the router. But I am getting following message & is flowing continuously
Save the config if you haven't already, then pull the card with the power off, restart the router, and see if you can login via console. You problably should be able to. Also, not all modules are supported on a 2620. For example a NM-4T will not work, neither will 100Mb cards. If you are sure that the 2620 will support this card, then try and reseat it after you have veriufied that you have access via console with no NM installed.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.