Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Need help with PAT on a ISDN 776 router

Hello,

I'm trying to forward VoIP data from the WAN to a LAN IP address via UDP & TCP ports using PAT. I've built the ports using the string below using the IP PAT PORTHANDLER command. The ports appear built when I use the SHOW IP PAT command, but the data doesn't flow to the IP address.

set ip pat porthandler 5189 192.168.1.6

set ip pat porthandler 5199 192.168.1.6

set ip pat porthandler 5200 192.168.1.6

Am I missing a step?

Thanks

2 REPLIES
Bronze

Re: Need help with PAT on a ISDN 776 router

Take a look through the following link. If you still can't get this setup to work, I would suggest that you re-post with your entire config or open a case with the TAC:

http://www.cisco.com/warp/public/458/49.html

New Member

Re: Need help with PAT on a ISDN 776 router

Raymong,

Thank you for responding.

I solved the problem. There was another step, I had forgotten to build the IP filter.

set ip filter udp in destination 192.168.1.xxx:5198-5199 accept.

Thanks

79
Views
0
Helpful
2
Replies
CreatePlease to create content