Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Need IOS....URGENT

Hi All,

I have following IOS ver:

Cisco Internetwork Operating System Software

IOS (tm) 3700 Software (C3745-I-M), Version 12.2(11)YT2, EARLY DEPLOYMENT

RELEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Copyright (c) 1986-2003 by cisco Systems, Inc.

Compiled Thu 27-Feb-03 16:45 by cmong

Image text-base: 0x60008940, data-base: 0x60C62000

ROM: System Bootstrap, Version 12.2(8r)T2, RELEASE SOFTWARE (fc1)

ROM: 3700 Software (C3745-I-M), Version 12.2(11)YT2, EARLY DEPLOYMENT

RELEASE SOFTWARE (fc1)

Router uptime is 14 hours, 46 minutes

System returned to ROM by reload

System image file is "flash:c3745-i-mz.122-11.YT2.bin"

cisco 3745 (R7000) processor (revision 0.0) with 131072K/11264K bytes of

memory.

Processor board ID

R7000 CPU at 350Mhz, Implementation 39, Rev 3.3, 256KB L2, 2048KB L3 Cache

Bridging software.

X.25 software, Version 3.0.0.

Basic Rate ISDN software, Version 1.1.

2 FastEthernet/IEEE 802.3 interface(s)

4 Serial network interface(s)

i can't configure encap in this IOS...wants to do the Inter Vlan routing. so pls suggest me corect IOS.

Thanks & Regards,

Ciscobuddy

3 REPLIES

Re: Need IOS....URGENT

You need IP Plus feature set, You can use the same IOS version though. Right now you have IP Only feature set.

New Member

Re: Need IOS....URGENT

hi Shanky

thanks for ur reply.....just sily question how can u recognised that this is IP only.. adn one more thing where should i see the feature set of this IOS...IP PLUS

Thanks & Regards,

Ciscobuddy

Re: Need IOS....URGENT

c3745-i-mz.122-11.YT2.bin"

Looking at this image name.

c3745 - indicates model of router - you have a 3745

i - for IP only feature set

j - enterprise feature set (in place of i)

p - service provider feature set (in place of i)

Instead of "i" if it was "is" it would be an IP Plus feature set. If it was "js" it would be Enterprise Plus feature set.

m - run from ram image

z - compressed (zipped) image

Hope that helps.

131
Views
0
Helpful
3
Replies
CreatePlease to create content