Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Need some help with Source Routing Translation Bridging!!

Hi All,

I am trying to acess an mainframe with SNA emulation from a ethernet network conected to a token-ring network with a Cisco 2600 router. the configuration of the router is this:

Building configuration...

Current configuration : 2590 bytes

!

version 12.2

service timestamps debug uptime

service timestamps log uptime

service password-encryption

!

hostname "Router"

!

ip subnet-zero

!

!

no ip domain-lookup

!

call rsvp-sync

!

source-bridge ring-group 10

source-bridge transparent 10 11 1 1

!

interface Ethernet0/0

ip address 9.179.90.7 255.255.255.0

full-duplex

bridge-group 1

!

interface TokenRing0/0

ip address 9.179.144.128 255.255.240.0

ring-speed 16

source-bridge 1 1 10

source-bridge spanning

!

ip classless

ip route 0.0.0.0 0.0.0.0 9.179.144.1

ip http server

ip pim bidir-enable

!

bridge 1 protocol ieee

!

dial-peer cor custom

Router#

I am using Personal Communicator to emulate SNA via TCPIP, I tried with both mac adresss (normal, inverted), but with no sucess...

Show bridge shows the mac from the Mainframe that I am trying to acess:

0200.8806.9820 forward RingGroup10 0 28 0

Anyone knows what can be missing ?

Regards,

Willian

2 REPLIES

Re: Need some help with Source Routing Translation Bridging!!

First of all I would suggest that you add the command multiring ip on the TR interface.

New Member

Re: Need some help with Source Routing Translation Bridging!!

86
Views
0
Helpful
2
Replies