Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Need to configure 7507x2 with 6506 Multi-vlan

Present setup the second 7507 is OFF

Need to configure 7507 Wan port's which is Ethernet and connected to 7200 router and 7200 is connected to T1 to pivate remote offices.

3 ethernet ports are used on 7507 for LAN and connected to 6506 serving 3 differnet vlan

Need advice

I need to Configure the second 7507as redented router

1 REPLY
Cisco Employee

Re: Need to configure 7507x2 with 6506 Multi-vlan

Your topology is not very clear from the description. If you can draw a simple topology diagram it will help. If you care looking for HSRP config, the following page should help

http://www.cisco.com/univercd/cc/td/doc/cisintwk/ics/cs009.htm

Regards,

-Prashanth

96
Views
0
Helpful
1
Replies
CreatePlease login to create content