Netflow Collection Over Multiple VLANs

[ashernuk]

I'm curious to know if it is possible to collect bi-directional netflow records over two separate VLANs. I have a single-mode fiber line run between a Catalyst 6509 and an F5 Networks BIG-IP box. I have two VLANs set up on that link, one for inbound traffic and one for outbound traffic. Once the inbound traffic hits the BIG-IP, it gets run through a firewall and filtered before it is sent out on the outbound VLAN. Is it possible for me to place a netflow collector on this link and collect records on the two separate VLANs with different subnets?

[ciscomoderator]

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.