Yes I am using it in our offices and it's providing good information and helps us get near real time information and compile graphical stats on our WAN. Would recommend flow-tools on LINUX. Works a charm!
I am using Cisco NetFlow statistics to monitor serial links. I send the statistics to an old Cisco SwitchProbe I bought off ebay for $200. I then forward those results to nGenius Real Time Monitor. Works great, highly reccomend doing this. If you really want to run a poor man's netflow jobber, lookup nTop. Runs on Windows and Linux.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...