Scrutinizer will export the raw NetFlow for either ingress or egress on an interface for any version of NetFlow, sFlow or IPFIX. It does this from it's own databased not NetScout, but maybe we should consider a partnership with them?
Toggle between Bidirectional (inBound) or outBound and then click on "View Raw Flows" to get all of the raw flow information (i.e. everything) exported by the router or switch. At 1 minute intervals, the Raw Flows are 100% unaggregated.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...