Network Admission Control(NAC). Dynamically check for machine security requ
Please suggest how to Accomplish the below scenario..
1) Enable 802.1x on Cisco switches - Network Admission Control(NAC). Dynamically check for machine security requirments and based on user ID put them in appropriate VLAN and apply access policies.
2)If a workstation does not comply with security requirements(Not having the correct patches, AV software, Firewall etc) the machine would be automatically moved to Remediation ( a separate VLAN for security reason) VLAN.
Re: Network Admission Control(NAC). Dynamically check for machin
You are looking for NAC feature. For this you basically need 3 major parts. Policy server, NAC aware devices and end stations with proper software installed.
You need a policy server on you network which could be AAA server at the back end and router with NAC aware IOS feature set. on the end station you need CSA ( Cisco Security agent ). With the conmination of these three componenets you will be able to achieve the end-point security.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...