i am about to install openview on our network and since i have to lisence the software based on the ip address i wanted to know the best segment to put this device on. do i put it on vlan 1 which is also the native vlan for the trunks running back to the core or do i create a new vlan and place it on that segment. once i have the nms installed i plan to install cisco works to monitor the switches.
There are many documents on NMS Best Practices which might help you with this question in more detail. To answer, in short, it is advisable to separate management platforms from that of normal user platforms. Regardless of what VLAN you put it on, it would more than likely function much better on it's own.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...