Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

new blade for 4507

Hi,

I purchased a WS-X4248-RJ45V for a 4507R-E switch.  The sh ver and sh inventory output is below. Will this blade work in slot 6 of this device?  I believe from what I am seeing this is the only slot available.

#sh ver

Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-ENTSERVICESK9-M), Version 12.2(40)SG, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Wed 07-Nov-07 18:00 by prod_rel_team

Image text-base: 0x10000000, data-base: 0x11ADF0B8

ROM: 12.2(31r)SG3

Dagobah Revision 226, Swamp Revision 32

SUSJC0101 uptime is 4 weeks, 1 day, 21 minutes

Uptime for this control processor is 4 weeks, 1 day, 21 minutes

System returned to ROM by reload

System restarted at 13:29:54 EDT Mon Mar 5 2012

System image file is "bootflash:cat4500-entservicesk9-mz.122-40.SG.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco WS-C4507R-E (MPC8245) processor (revision 14) with 524288K bytes of memory.

Processor board ID FOX1203HC9X

MPC8245 CPU at 333Mhz, Supervisor IV

Last reset from Reload

11 Virtual Ethernet interfaces

96 FastEthernet interfaces

10 Gigabit Ethernet interfaces

403K bytes of non-volatile configuration memory.

Configuration register is 0x2101

Sh inventory

NAME: "Switch System", DESCR: "Cisco Systems, Inc. WS-C4507R-E 7 slot switch "

PID: WS-C4507R-E       , VID: V01,

NAME: "Clock Module", DESCR: "Clock Module"

PID: WS-X4K-CLOCK-E    , VID: V01,

NAME: "Mux Buffer 1 ", DESCR: "Mux Buffers for Redundancy Logic"

PID: WS-X4590-E        , VID: V01,

NAME: "Mux Buffer 2 ", DESCR: "Mux Buffers for Redundancy Logic"

PID: WS-X4590-E        , VID: V01,

NAME: "Mux Buffer 5 ", DESCR: "Mux Buffers for Redundancy Logic"

PID: WS-X4590-E        , VID: V01,

NAME: "Mux Buffer 6 ", DESCR: "Mux Buffers for Redundancy Logic"

PID: WS-X4590-E        , VID: V01,

NAME: "Mux Buffer 7 ", DESCR: "Mux Buffers for Redundancy Logic"

PID: WS-X4590-E        , VID: V01,

NAME: "Linecard(slot 1)", DESCR: "10/100BaseTX (RJ45)V with 48 10/100 baseT voice power ports (Cisco/IEEE)"

PID: WS-X4248-RJ45V    , VID: V08,

NAME: "Linecard(slot 2)", DESCR: "10/100BaseTX (RJ45)V with 48 10/100 baseT voice power ports (Cisco/IEEE)"

PID: WS-X4248-RJ45V    , VID: V08,

NAME: "Linecard(slot 3)", DESCR: "Supervisor IV with 2 1000BaseX GBIC ports"

PID: WS-X4515          , VID: V13,

NAME: "Netflow Services Card card in supervisor 3", DESCR: "NetFlow Services Card"

PID: WS-F4531          , VID: V05,

NAME: "GigabitEthernet3/1", DESCR: "1000BaseSX"

PID: QFBR-5686         , VID: 00 ,

NAME: "Linecard(slot 4)", DESCR: "Supervisor IV with 2 1000BaseX GBIC ports"

PID: WS-X4515          , VID: V13,

NAME: "Netflow Services Card card in supervisor 4", DESCR: "NetFlow Services Card"

PID: WS-F4531          , VID: V05,

NAME: "GigabitEthernet4/1", DESCR: "1000BaseSX"

PID: QFBR-5686         , VID: 00 ,

NAME: "Linecard(slot 5)", DESCR: "6 Dual media SFP or 10/100/1000BaseT (RJ45)V voice power ports (Cisco/IEEE)"

PID: WS-X4506-GB-T     , VID: V05,

NAME: "GigabitEthernet5/1", DESCR: "1000BaseSX"

PID: FTLF8519P2BCL-CS  , VID: 00 ,

NAME: "GigabitEthernet5/2", DESCR: "1000BaseSX"

PID: SFBR-5766PZ       , VID:    ,

NAME: "GigabitEthernet5/3", DESCR: "1000BaseSX"

PID: SFBR-5766PZ       , VID:    ,

NAME: "GigabitEthernet5/4", DESCR: "1000BaseSX"

PID: SFBR-5766PZ       , VID:    ,

NAME: "GigabitEthernet5/5", DESCR: "1000BaseSX"

PID: SFBR-5766PZ       , VID:    ,

NAME: "GigabitEthernet5/6", DESCR: "1000BaseSX"

PID: SFBR-5766PZ       , VID:    ,

NAME: "Fan", DESCR: "FanTray"

PID: WS-X4597-E        , VID: V01,

NAME: "Power Supply 1", DESCR: "Power Supply ( AC 2800W )"

PID: PWR-C45-2800ACV   , VID: V04,

NAME: "Power Supply 2", DESCR: "Power Supply ( AC 2800W )"

PID: PWR-C45-2800ACV   , VID: V04,

Thank you.

Lynne

Everyone's tags (3)
1584
Views
0
Helpful
0
Replies
CreatePlease to create content