Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

nGenius 10GIG module support

The NAM listed below recognizes the 10GIG modules, however the nGenius does not appear to.

Below is the pertinent info.

I currently have the following NAM:

Cisco Network Analysis Module (WS-SVC-NAM-2) 2.2(1a)

Maintenance image version: 1.1(1)

BIOS Version: 4.0-Rel 6.0.4

NAM Daughter Card Micro code version: 1.31.1.27 (NAM)

Mon Jan 26 11:24:38 2004 Patch: c6svc-nam-2.2-patch-1-0 Description: Patch version 1 for NAM release 2.2(1a)

I am running the following version of nGenius RTM: version 1.4.0 Build 468

It does not apperar that the nGenius supports the 10 GIG modules (WS-X6516A-GBIC) we are using.

The catalyst 6509 is running SUP720's (WS-SUP720-BASE) with the following IOS:

12.2(17b)SXA

Any help would be great

Mike

3 REPLIES
Blue

Re: nGenius 10GIG module support

NAM has a built-in Traffic Analyzer/Web GUI which gives you the same features as RTM. So, you can use NAM's Web GUI instead, which works much better that RTM. Also, you may want to upgrade your NAM to the latest software version 3.3 from CCO.

New Member

Re: nGenius 10GIG module support

Thank You for the advice.

The customer purchased a Solaris Box @ the cost of 10K, we would like to use the nGenius RTM if at all possible.

Mike

New Member

Re: nGenius 10GIG module support

Hi,

Have you tried sp9 of RTM 1.4 - build 489.?

I'm not sure if this bug applies to you as I don't have a NAM-2 and if the 10Gb port is the 'second port'.

CSCeb42484 = RTM 1.4 Needs to Support NAM-2s 2nd Monitoring Interface.

Rgds,

Ian

106
Views
0
Helpful
3
Replies
CreatePlease login to create content