We replace a Cisco 2501 router today with appletalk and IPX on ser 0 and IP, IPX, and apple talk on ser 1. Eth0 is connected to a 5500 with an RSM. We get the following messages:
<p>_Mar 1 13:09:39: %CLNS-3-BADPACKET: NLSP: L1 LSP, Name matches ours, ID 0030.94
E6.2AF2.00-00, seq 717, ht 5981 from _HDLC_ (Serial1)
_Mar 1 13:07:38: %CLNS-3-BADPACKET: NLSP: L1 LSP, Name matches ours, ID 0030.94
E6.2AF2.00-00, seq 715, ht 6030 from 0005.311e.6c00 (Ethernet0)_
_Mar 1 13:06:36: %CLNS-3-BADPACKET: NLSP: L1 LSP, Name matches ours, ID 0030.94
E6.2AF2.00-00, seq 717, ht 6161 from _HDLC_ (Serial0)
0030.94E6.2AF2 is the MAC address of Eth0 on the replaced router. Will this MAC address time out eventually? We've seen this before and it doesn't seem to be service affecting but all 3 adjacent neighbors seem to have the wrong ID for the new router. How can this be corrected?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...