Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

NM-1E2W and WIC-2T

Hi!

Is it possible to use WIC-2T and NM-1E2W together on speed 2Mbit/s?

Thanks

2 REPLIES
New Member

Re: NM-1E2W and WIC-2T

Hello

I believe that you CANNOT use these two together. I tried a while ago in a 3640 running IOS version 12 and in the end had to exchange the NM-1E2W for a fast ethernet version NM-1FE2w card which worked ok. May be worth a look at the very latest version 12 IOS's as they may have overcome this issue but I believe that you are in for an expensive upgrade.

Hope this help

Regards

Cisco Employee

Re: NM-1E2W and WIC-2T

I confirm. The NM-1E2W, NM-1E1R2W, and NM-2E2W Network Modules don't have enough performance to support the WIC-2T.

87
Views
0
Helpful
2
Replies